Tank Container

Tank Container Pumping Packages

CIMC Yangzhou Base supply standard or customized fuel pumping packages depending on your application and required flow rate.

All pumping packages are tried and tested in the field for reliable fuel dispensing.

Tank Container Standardized packages are available for:

• Small Fleet Refueling
• Home Base Refueling
• General Purpose
• Industrial
• Mining
• Tanker Unloading
• Lubricant and Waste Oil

CIMC Yangzhou Base range of purpose-designed pump packages are designed to provide your equipment with optimum fuel quality for increased uptime.

Our systems are designed by a team of engineering specialists and tested in the field under standard operating conditions.

Tank Container: Containerized Tank

• More suitable for multimodal transportation.
• 50% more volume compared with traditional tank products.
• Double-walled design, more safety, environmental protection.
• Fit for future requirements: modular and transportable.

Tank Container: Bulk Fuel Tank Series

Bulk Fuel Tank is a primary tank contained into a secondary container design that can be transported and relocated easily, 110% bunded.

• The primary tank contained in the secondary container
• No need pumping system, the fueling points are on the bottom, to feed by gravity
• Regulatory access manway
• Overfill protection supplied with mechanical shutoff and audible/visual alarm
• Permanent ladder for easy inspection and access
• Emergency shut off valve
• Calibrated fuel level gauge
• Air pressure vents
• CSC Certificate

Tank Container: UL Certificated Series

UL Certificated Fuel Tank is a primary tank contained into secondary container design which can be transported and relocated easily, 110% bunded.

• The primary tank contained into the secondary container
• K1 Pump
• 3” basket strainer
• Front-mounted security door with container lock handles
• Overfill protection supplied with mechanical shutoff and audible/visual alarm
• Permanent ladder for easy inspection and access
• Calibrated fuel level gauge
• Air pressure vents
• CSC Certificate
• UL 142 Certificate

Tank Container: MT Series

The containerized MT Series is a premium fuel storage solution designed for harsh operating environments with minimal site preparation.

Pressed corners and a  reinforced top mean a  robust tank for your fuel storage needs.

Built to the size of standard  ISO  shipping containers;  the  MT  Series has a  greater safe fill capacity compared to other models of the same footprint.

This robust range of fuel storage tanks allows for full visibility around and under the tank;  something considered important where stringent environmental regulations exist. No need to lift for inspection of the underside.

CIMC Yangzhou Base Tank Container Introduction

• Self-contained design
• Bunded or double-walled
• Tanker fill point supplied with 80nb (3”) full bore, fire safe flanged ball valve, and wafer style nonreturn valve
• Container corner castings
• 760mm ID manway
• Tank floor has fallen to the front for water collection
• Interstitial space integrity system utilizing a dipstick
• Containment compartment (internal bunding) with pressure vent
• Front-mounted security doors with container lock
• Under tank visibility
• Approved and marked for standards UL142 and ULC S601
• 350-grade steel tank container
• Overfill protection and anti-siphon
• Bunded pump bay with inspection platform, kickboards, and access ladder

Tank Container Data Sheet

Tank Container Flysheet