CIMC Yangzhou Base Battery Swapping Station/New Energy Vehicle Containerized Power Station consists of several container modules, suitable with various brand new energy cars and battery systems, integrated with battery storage, battery charging, car moving, and internet communication system.
Battery Swapping Station is an energy station that provides charging and quick replacement of power batteries for electric vehicles. Power change mode has a natural advantage over the traditional charging mode. The Battery Swapping Station takes only 55 square meters and can be disassembled in 2 hours, and a replacement battery takes only 3 minutes, making it faster than an average fuel truck pits in efficiency and convenience.
Battery Swapping Station is ready to be put into use after factory assembly and commissioning, making it easy to use and low cost.
Battery Swapping Station Advantages
- Good user experience
- Energy replenishment speed
- Energy intensive, low loss, long life
- Battery Swapping Station Eliminates New Energy Barriers and Promotes New Energy Vehicles
- Integrated planning of resource sharing
Battery Swapping Station Scheme Features
- Low manufacturing costs
- System commissioning is completed in the factory, on-site only simple installation
- Easy to transport, easy to hoisting
- Site quick installation, no need for civil construction
- Small footprint, low operating costs
- Battery Swapping Station can achieve automatic chassis replacement battery, no human intervention
- Simple structure, easy to maintain
- No pollution, low noise
Battery Swapping Station Battery Change Process
1. Electric Pan Trolley Take Battery
Electric vehicles drive into Battery Swapping Station, automatically calibrate vehicle position via rails and tire slots on the floor, stop power off and confirm data, and enter the fully automatic battery change operation process.
2. Palletizer Replacement Battery
Wait for the palletizer on the station to receive the signal that the electric pan trolley reaches the designated station, remove the battery-free from the electric pan trolley.
3. Palletizer Remove Full Battery
The palletizer moves to the designated location, remove the full battery and drives into the pending position, and places the full battery on the electric pan trolley.
4. Electric Pan Trolley to Install Battery
The electric pan trolley moves to the changing battery platform position, the full battery into the corresponding position of the electric vehicle, tighten the locking mechanism, complete the whole battery change process.
Battery Swapping Station/New Energy Vehicle Containerized Power Station System can be used as:
- Battery swap
- New energy vehicle battery exchange
- Public charging station
Battery Swapping Station/New Energy Vehicle Containerized Power Station System Data Sheet
|Tare Weight||8000 kg|
|Roof||T1.6mm SPA-H +T50mm rock wool sandwich|
|Sidewall||T1.6mm SPA-H +T50mm rock wool sandwich|
|End wall||T1.6mm SPA-H +T50mm rock wool sandwich|
|Door||Single steel door/rolling door|
CIMC Yangzhou Base Battery Swapping Station Service Details
|Pre-sales service||Technical and commercial consultant|
Customized design and engineering
|Return Policy/After-sales Service||1 year warranty for structure|
3 years for painting
5 years for decal
|Lead time||60 days after order confirmation|
|Transportation Method||Ocean, Railway, Road|
|Freight and transportation period||Confirmed according to specific destination|